Rayan Coles

Description:
Wireless remote control lamp holder for E27 bulb. Change your bulb with this lamp holder, could remote control your lighting system. ON/OFF two buttons on the remote controller to control the lamp ON/OFF. Suitable for family, office, factory etc

Features:
Wireless remote control lamp holder for E27 bulb.
Up to 20 meters remote control distance in open ground.
Adopt Surface Acoustic (SAW) frequency stabilization technology, frequency is ultra-stable and reliable.
Imported IC coding, there are millions of different codes, and the neighbors will not cause similar products using the -holding phenomena.
Easy installation and convenient for home use.
 
Specifications:
Operating Voltage: AC220V (50/60Hz)
Battery: 12V, 23A (not included)
Standby Current: 220V 50uA (<0.015W)
Rate Voltage: 2A
Material: PC
Control Distance: >10M(Indoor partition wall)
 
Package included:
1 x Lamp Holder
1 x Remote Controller (battery not included)
1 x Bracket 

Specification:
Item Type: Scary Mask
Material: PVC+EL Wire
Color: A: Bronze mask fluorescent green + white light bar
Size: 25X16cm
 
Feature:
This is a scary Halloween mask with crossed eyes and sealed mouth. Suitable for party and festivals.
Switch Controlled: You can turn on or off the mask by switch.
Harmless: Environmental friendly material does no harm to your health.
Low Power Consumption: Super energy saving and long lasting.
Cool: Due to the cold light source, the item does not heat up at work.
 
Package included:
1 X Halloween Horror Mask(Battery not include)

Specification:
Base Type: E27
Voltage: 220V
Power: 5W, 7W, 9W
LED chip: 5730
Light color: white
Color temperature: 6000-6500 K
Detection range: ≤ 3M
Material: plastic
Can be used for: home lighting, night lighting, infrared human body sensing function, responsive, energy saving and environmental protection
 
Note:
1.The sensor head faced to Exit or Entrance
2.The lamp should be kept far away from which temperature is high and sensitive place.
3.Not put any big object around it. 

Work principle:
When you in sensor range, it works about 40 seconds.
After 40 seconds, if you not move, the lamp not work.
Too bright or in the day, the lamp doesn't work.
It only works in dark environment or at night.

Trouble removal:
Occasionally it can auto light up, may be there's animal moving or the install angle is not correct.
The lamp is turned off every 40 seconds, and repeat it, you have to check whether a person or an animal moves, or take it to another room to check.
 
Package included:
1 x E27 LED bulb

Features:
Have Wave Activated, the sensor of under cabinet light turn On/Off with a simple wave.
Dimmable Function, Hand wave for more than one second at the sensitive switch, convenient to adjust the brightness from 10%~100%.
Can be easily installed, which will greatly improve its use value, making it an ideal product that does no harm to human body.
Widely used for closet, wardrobe, washbasin, writing desk, cabinet, kitchen, bathroom, etc.

Specification:
Rated Voltage: DC12V
Power: 4W, 6W, 8W
Color Temperature: Cool White
Lumen: 22LM
CRI: >80
Detection Distance: 5cm
Material: Aluminum Shell + Led Sheet
DC connector size: 5.5*2.1mm
Dimensions: 300mm/500mm/1000mm*17.5*7mm(L*W*H)

Package included:
1x Motion Sensor Cabinet Rigid Light